Are you looking to buy a 12-inch carbide miter saw blade?
Discover the 13 best 12-inch carbide miter saw blades available on the market now.
1. Forrest CM12806115 Chopmaster 12-Inch 80-tooth ATB Miter Saw Blade with 1-Inch Arbor
For chop saws and radial arm saws. These top-quality miter saw blades produce perfectly cut miter joints. Made with double-hard C-4 submicron carbide for up to 300% longer life. A heavier than normal steel plate and a negative face hook maintain maximum stability for the best cut. Each blade is hand-straightened to a runout of 0.001/0.002 for maximum cut quality. The tooth style (4 points and a flat) maximizes steady, clean cuts with no bottom splintering. You will be amazed by the extra-smooth, tight cuts you will get with this blade.
2. Freud LU90M012 12-Inch 120 Tooth TCG Thin Stock Non-Ferrous Metal Cutting Saw Blade with 1-Inch Arbor
This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions.high tooth count with a 5 degree hook angle allows the teeth to slice efficiently through the material without binding.requirements on the cutting edge greatly differ with non-ferrous metals than with cutting wood.this in mind, Freud formulated a special carbide with high impact strength for this blade.recommends use of a liquid lubricant when cutting non-ferrous metals.can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Sticks are not recommended. Application: cutting thin aluminum and other non-ferrous metals.
3. CMT 219.090.12 Industrial Sliding Compound Miter & Radial Saw Blade, 12-Inch x 90 Teeth 4/30° ATB+1TCG Grind with 1-Inch Bore, PTFE Coating
For fine finish crosscuts. The 5° negative hook limits splintering and “climbing”. Use on radial arm saws & sliding compound miter saws for cutting soft/hardwood, plywood & laminates. 0.118 kerf thickness, 0.098 plate thickness, -5° hook angle, 4ATB + 1 trapezoidal tooth Grind. Micrograin carbide teeth to last longer and deliver smooth cuts. Non-Stick PTFE Coating keeps blade running cool, reduces pitch buildup, protects against corrosion.
4. Freud 12 In. 96 Tooth Crosscutting Saw Blade with 1 In. Arbor (LU85R012)
The 12-inch Freud LU85R012 delivers fast, accurate crosscuts and leaves glass-smooth finishes that eliminate the need for sanding. Featuring 96 teeth with alternating bevels and TiCo high-density carbide tips, a unique side-grind setup that polishes material as you cut through it, and Freud’s insulating Perma-SHIELD coating, this blade is built to deliver top results over the long haul.
5. Freud LU73M012 12-Inch 72 Tooth ATB Cabinetmaker’s Crosscutting Saw Blade with 1-Inch Arbor
The 12-inch Freud LU73M012 is designed to meet the high-volume, high-performance needs of industrial cabinetmakers. Featuring a tough steel body with laser-cut, anti-vibration slots plus 72 teeth in an alternating-top-bevel configuration that’s ideal for crosscutting, this blade delivers both precision and durability. It also offers the strength and sharpness of TiCo high-density carbide tips and Freud’s antifriction, antibuildup Silver I.C.E. coating.
6. Amana Tool A.G.E. Series MD12-106 Heavy Duty Miter/Double Miter 12-Inch x 100-Tooth 4 ATB+R 1-Inch Bore Saw Blade
Perfect for glass smooth cuts in moldings, and picture frames. 12-Inch x 100-teeth 4 alternate top bevel followed by 1 raker grind, -5-degree hook, 1-inch bore. Laser cut expansion slots allowing the blade to expand and contract from heat preventing warpage. Massive tool steel plate. Extra large European style carbide tips providing more resharpenings. Industrial quality. Made in Germany.
7. Hitachi 18109 8-Teeth Polycrystalline Diamond 12-Inch Dry Cutting Fiber Cement Saw Blade
It has a 12-inch diameter and is made for use with most 12-inch miter saws. This blade has a 1-inch arbor, and its special 8-tooth design provides precise, dust-reducing cuts. The blade’s highly durable polycrystalline diamond tips provide 5 times longer cutting life than other diamond-tipped blades and 30 times longer cutting life than traditional carbide blades. The polycrystalline diamond tips also have self-sharpening properties. This blade is ideal for ripping, crosscutting, and mitering in fiber cement boards and siding.
8. DEWALT DW72100PT 12-Inch 100T Ultra-Smooth Crosscutting Saw Blade
Dewalt DW72100PT features premium micro-grain carbide that produces ultra-sharp cutting edges that dramatically reduce splintering. The precision balanced, laser-cut body provides extremely accurate cuts, while the exclusive dampening slots reduce vibration to enhance cutting accuracy. The tough coat finish reduces heat, friction, and gum to promote blade life. The blade is 12-inches in diameter with 100 teeth and a 1-inch arbor. The hook angle is -5 degrees, the kerf is 0.102-inch and plate thickness is 0.079-inch. The tooth grind is ATB+R, and can be used at maximum 4,800 PRM.
9. DEWALT DW3216PT Precision Trim 12-Inch 60 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor and Tough Coat Finish
It features extra-strong micro-fiber carbide teeth that stay sharp and reduce splintering. This crosscutting blade also features dampening slots around the body to help reduce vibration and increase accuracy, and a tough-coat body finish that resists heat, gumming and friction to ensure a longer blade life and consistently cleaner cuts.
10. Oldham 12080TP All Purpose 12-Inch 80 Tooth ATB Trim and Finishing Saw Blade with 1-Inch Arbor
Longer lasting than steel blades, they are designed for almost any project at an affordable price. Full bodied plate provide clean, accurate cuts. Carbide tips provide long life and clean cuts. Lasts 10 times longer than standard steel blades.
11. Makita A-93734 12-Inch 100 Tooth Micro Polished Mitersaw Blade
Micro-grain carbide teeth are honed with up to 600 grit for a mirror finish. Fully hardened and expertly hand tensioned steel saw plates for true cuts. Ultra thin kerf 0.091″, 5 degree hook angle, and 0.071 plate thickness. Ultra-fine crosscutting. Ideal for: hardwood.
12. Hitachi 726101 90-Teeth Tungsten Carbide Tipped 12-Inch ATB 1-Inch Arbor Finish Saw Blade
The Hitachi 726101 is ideal for cutting all types of woods with a clean, ultra-fine finish. With tungsten carbide tipped teeth, this alternate top bevel blade withstands years of repeated use and outlasts traditional blades. Tungsten carbide gives saw blades (and some router bits) a sharper, longer lasting tip. This blade is precision balanced and tensioned to remain stabilized all day long. With 90-teeth, a 1-inch arbor, a 0.11-inch kerf width and the strength of tungsten carbide, this blade delivers smooth rapid cuts.
13. IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 12-Inch, 40T (14080)
It is designed for optimal performance with miter and table saws where a smooth finish and accurate cuts are critical. This thin kerf blade features carbide-tipped teeth and a hardened steel body to deliver a long cutting life. Other features include a reinforced shoulder and heat vents that reduce unwanted blade warp.