Are you looking to buy a 6-1/2-inch circular saw blade?
Discover the 11 best 6-1/2-inch circular saw blades available on the market now:
1. Milwaukee 48-40-4112 6-1/2-Inch 40 Tooth Finish Saw Blade
The Milwaukee 48-40-4112 offer faster cutting and extra long life for contractors. With carbide teeth made of C3 grade micro ground carbide, these blades will stay sharper for longer periods of time. A hardened alloy steel body ensures straight, accurate cuts, while specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. They are ideal for trim and finish work. They feature 40 carbide teeth, a 5/8-inch arbor, and a thin kerf for faster cutting.
2. CMT 226.030.06 Industrial Dry Cut Steel Saw Blade, 6-1/2-Inch x 36 Teeth TCG Grind with 5/8-Inch
This low-noise saw blade is primarily intended for large panel saws and industrial woodworking machinery. High precision, tight tolerance and longer lifetime are only a few features this tool offers! In addition, this blade features a heavy-duty plate (46-48 Rockwell in hardness), chrome carbide cutting edges to guarantee extreme performance on steel pipes, steel rods, iron and sheet metals, anti-vibration design and expansion slots to reduce noise. This tool is also produced by following precise procedures and techniques to confer greater value and allow for higher performance: tri-metal brazing, balancing and tensioning ring and laser-cutting for the steel plate. Try out the quality of the CMT blades!
3. Vermont American 27247 6-1/2-Inch 40T Smooth Cut Carbide Circular Saw Blade
Vermont American is the world’s largest manufacturer of circular saw blades. They produce the widest range of high-quality circular saw blades for use in portable and stationary saws. All of their carbide tipped blades endure a 100% tip impact test inspection. King carbide blades provide the best in precision, durability and performance. Blades have dyanite carbide teeth for superior strength, wear, edge retention and impact resistance. Dyanite carbide lasts 6-times longer than standard carbide. Heavy bodies and fully hardened plates with extra-large, re-sharpenable teeth make these blades fit for professional use and won’t distort under heavy use, so they run truer and make more accurate cuts.
4. Oshlun SBNF-065060 6-1/2-Inch 60 Tooth TCG Saw Blade with 5/8-Inch Arbor
The non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. Features heat vents for cooler operation.
5. Oshlun SBF-065048 6-1/2-Inch 48 Tooth TCG Saw Blade with 5/8-Inch Arbor
The ferrous metal blades have been designed with a durable carbide grade and triple chip tooth grind which ensures an extended cutting life of all types of ferrous metals (mild steel) such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials.
6. Avenger AV-65948 Steel Cutting Saw Blade, 6-1/2-inch by 48 tooth, 5/8-inch arbor, C-6, TCG
They are designed to cut all ferrous metals like iron, steel pipe, angle iron, flat bar, rebar and galvanized materials. Will also cut all kinds of wood and non-ferrous metals like aluminum, brass and copper. Fits most portable power saws with a 5/8-inch arbor and C-6 professional grade carbide. Max 4,200 rpm.
7. KwikTool USA BB650 C7 Bad Blade 6-1/2-Inch 42 Tooth With 5/8-Inch Arbor
These blades can cut through wood, wood with nails, steel, iron, plastics, laminates, composites plus non-ferrous metals like aluminum, copper, brass, and alloys all with no kick-back and without ever changing a blade. Do the work of a whole toolbox full of blades! One blade for any job. KwikTool has sold these products into the European industrial market for the past 15 years and is now making them available to the US market. The products are supported by years of in-field use, and backed by US customer service.
8. Bosch DCB618 Daredevil 6-1/2-Inch 18-Tooth Fast Ripping Corded/Cordless Circular Saw Blade
On the jobsite time is money, so framers need circular saw blades that make fast, precise cuts over a long time. And that’s just what Bosch daredevil framing blades deliver every day. Thin-kerf, extra-hard steel plate blades with triple-sharp carbide teeth that power through wood to deliver a combination of speed and a smooth finish. Expansion slots control blade warp and body slots reduce heat for cool running. A speed coat finish provides added speed and avoids binding in treated or wet lumber.
9. DEWALT DW9196 6-1/2-Inch 40T Precision Framing Saw Blade
They are revolutionary blades, which offer breakthrough performance, outstanding blade control, longer life and durability, are ideal for professionals tasked with applications involving framing, roofing and siding installation and concrete forms. These framing blades have a tooth geometry to feature a front face grind that creates a sharper tip that helps to reduce the blade’s cutting force. They also feature an exclusive plate technology with resin filled expansion slots to dampen vibration and improve cutting feel and performance. To address durability, DEWALT incorporated a new anti kickback shoulder into these blades. This anti kickback shoulder reinforces the carbide tip for impact resistance, and it also helps to reduce the risk of saw kickback.
10. Freud D0624X Diablo 6-1/2-Inch 24-Tooth ATB Framing Saw Blade with 5/8-Inch Arbor
It is designed to meet the needs of the construction and remodeling market. This advanced laser-cut blade features a thin kerf, making it ideal for portable and low powered saws on the jobsite. Features Freud’s TiCo Hi-Density Carbide, a Perma-Shield Coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. It gives long life in ripping and crosscutting applications.
11. Milwaukee 48-40-4108 6-1/2-Inch 24 Tooth ATB General Purpose Saw Blade with 5/8-Inch Arbor for Blade Left Saws
It is easy to use and durable, manufactured in Japan. Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.