Best 8 Inch Miter Saw Blades

Are you looking to buy a 8-inch or 8-1/4-inch or 8-1/2-inch miter saw blade?

Discover the 9 best 8-inch miter saw blades available on the market now:

1. Freud LU85R008 8-Inch 64 Tooth ATB Ultimate Cut-Off Saw Blade

Best 8 Inch Miter Saw Blade
The 8-inch Freud LU85R008 delivers fast, accurate crosscuts and leaves glass-smooth finishes that eliminate the need for sanding. Featuring 64 teeth with alternating bevels and TiCo high-density carbide tips, a unique side-grind setup that polishes material as you cut through it, and Freud’s insulating, Perma-SHIELD coating, this blade is built to deliver top results over the long haul. Ideal for smooth crosscuts in materials that are 1/4 to 1-5/8 inches thick. Heavy-duty plate with laser-cut, anti-vibration slots. Tough Perma-Shield coating reduces friction and heat buildup.

Best 8 Inch Miter Saw Blades



2. Freud LU84R008 8-Inch 40 Tooth ATBF Combination Saw Blade

Freud LU84R008
The 8-inch Freud LU84R008 offers a configuration that pairs flat teeth and alternating-top-bevel teeth to ensure strong performance both when ripping and when crosscutting. Also offering TiCo high-density carbide tips, laser-cut, anti-vibration slots that eliminate the need for stabilizers, and Freud’s Perma-SHIELD coating to prevent the buildup of friction and heat, this multi-purpose blade is built for lasting convenience.

Buy Freud LU84R008



3. Freud LM72R008 8-Inch 24 Tooth FTG Ripping Saw Blade

Freud LM72R008
Designed for serious woodworkers, the 8-inch Freud LM72R008 heavy-duty rip saw blade features an ultra-tough Perma-SHIELD coating that reduces heat and friction. It delivers smooth, fast cuts through hard- and softwood. Thanks to a rigid blade body and 24 oversized, flat-top teeth with TiCo high-density carbide tips, this is one dependable, long-lasting blade. Plus, its well-balanced, anti-vibration design means there’s no need to use stabilizers with it.

Buy Freud LM72R008



4. Oldham 8004524 8-Inch 24T Carbide Saw Blade Combination

Oldham 8004524
Full bodied plate provide clean, accurate cuts. Carbide tips provide long life and clean cuts. Lasts 10 times longer than standard steel blades.

Buy Oldham 8004524



5. Evolution Power Tools FURY3BLADE 8-1/4-Inch Multipurpose Cutting Replacement Blade

Evolution Power Tools FURY3BLADE
The Evolution Power Tools FURY3 designed specifically for the FURY3 8-1/4-inch multipurpose compound sliding miter saw, is the ultimate in Tungsten Carbide Tipped blade technology. When fitted to the FURY3, each blade will easily cut steel, aluminum, wood and plastics. The blade’s innovative tooth configuration enables fast, efficient cuts and the high grade carbide teeth enhance durability. The anti kick back system allows cuts through multiple materials without resistance. FURY blades show no weakness even when encountering the most difficult cutting applications.

Buy Evolution Power Tools FURY3BLADE



6. Forrest CM08H606100 Chopmaster 8-1/2-Inch 60 Tooth ATB Miter Saw Blade with 5/8-Inch Arbor

Forrest CM08H606100
A heavier than normal steel plate maintains maximum stability for the best cut. A negative face hook also adds to optimum rigidity when cutting. Each blade is hand straightened to run out of 0.001″/0.002″ for maximum cut quality. Eliminates bottom splintering on radial crosscuts. With new 30° ATB tooth style this blade stops totally, all bottom and top splintering on ply veneers on both radial and table saw machines.

Buy Forrest CM08H606100



7. Freud LU91R008 8-1/2-Inch 48 Tooth ATB Saw Blade

Freud LU91R008
This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the workpiece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results. 5/8″ arbor 0.090 kerf.

Buy Freud LU91R008



8. CMT 253.060.08 ITK Industrial Finish Sliding Compound Miter Saw Blade, 8-1/2-Inch x 60 Teeth 1FTG+2ATB Grind with 5/8-Inch Bore

CMT 253.060.08
This blade features a thin kerf, which makes it ideal for saws that are a bit underpowered, but at the same time this tool delivers great performance. You will be satisfied with the excellent price/quality ratio. The laser cut heavy-duty blade plate is hardened to allow for great resistance (46-48 Rockwell in hardness) and features expansion slots to reduce noise and anti-vibration design. The teeth are made of micrograin carbide to ensure long-lasting cutting performance and deliver smooth cut on wood and wood products. These are brazed to the blade body through a special trimetallic bond (copper-silver-copper), so that longer cut performance and resistance are guaranteed. Blade is delivered in a unique CMT plastic case.

Buy CMT 253.060.08



9. Freud D0860S Diablo 8-1/2-Inch 60 Tooth Fine Finishing Miter Saw Blade

Freud D0860S
It is designed to meet the needs of the construction and remodeling market. This advanced laser-cut blade features a thin kerf, making it ideal for portable and low-powered saws on the jobsite. A permanent Perma-Shield coating keeps this blade free from gumming and corrosion, and laser-cut stabilizer vents reduce vibration and heat buildup for more precise cuts and longer cutting life. This particular blade is the perfect choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. This Diablo saw blade has a 5/8-inch arbor with a fine finish, excellent for crosscutting oak, pine, melamine, plywood, and molding.

Buy Freud D0860S




Read More:

Related posts: