Are you looking to buy a 8-inch or 8-1/2 table saw blade?
Discover the 9 best 8-inch table saw blades available on the market now:
1. Freud 8 In. Dial-A-Width Stacked Dado Set with 5/8 In. Arbor (SD608)
Experience the speed and convenience of a stacked dado without the need for shim adjustments with the Freud SD608. This patented dial system clicks into place to allow blade-width adjustments up to .906 inch in fine 0.004-inch increments. Included are two razor-sharp blades that cut with ultimate precision, so you can achieve clean edges and flat bottoms. This versatile dado set is designed for the serious woodworker set and cuts a wide range of materials from hardwood to laminate.
2. DEWALT DW7670 8-Inch 24-Tooth Stacked Dado Set
The DEWALT DW7670 8-inch stacked dado set has heavy gauge, laser cut plates that provide true, accurate cuts. The micro-grain carbide teeth deliver clean cuts and reduce splintering. It has 4 tooth chippers that give smooth, flat bottom cuts and stainless steel shims that allow for ultra-fine width adjustments. It includes a heavy duty storage case that protects the blades against chipped teeth and damage. This blade is ideal for quality-conscious woodworkers, cabinetmakers and woodworking professionals. It makes clean, smooth dado cuts, rabbet cuts, tenons, and half-lap joints in hard woods, soft woods, plywood, and melamine.
3. Irwin Tools 1811865 Marples 8-Inch Stack Dado Blade
The Irwin Tools 1811865 marples 8-inch stack dado blade is part of a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry-leading laser-cut, thin kerf saw blades are produced in a highly-automated, state-of-the-art facility in Udine, Italy – the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish professional woodworkers and finish carpenters demand. The blades are precision tensioned for flawless cuts. They also feature a heat resistant, non-stick coating that has an Aluminum Matrix added to it to dissipate heat for easy clean up and truer, cleaner cuts. With 12 teat and features resharpenable oversized carbide teeth. It cuts grooves from 1/4-Inch to 7/8-Inch in diameter. It is great for use in softwood, hard woods, plywood and melamine. The set includes 2 outer blades, 3 chippers, 3 spacers and 7 shims ranging from 0.1 to 0.5mm or 0.004” to 0.02”.
4. Oshlun SBJ-0830 8-Inch Box and Finger Joint Set
The Set is perfect for woodworker’s who want to make precision box joints at an affordable price. The high tooth count saws produce smooth, square notches and fingers in the two most popular sizes, 1/4-inch and 3/8-inch. The precision ground C-4 micro grain tungsten carbide tips stay sharp longer and cut through all types of hardwood and softwood with the greatest of ease. Each set also includes detailed setup instructions and is packaged in a full color storage case. Cuts perfectly square fingers and flat bottom notches every time. Easily change from a 1/4-inch to a 3/8-inch cut by reversing the inner and outer blades.
5. Freud LU85R008 8-Inch 64 Tooth ATB Ultimate Cut-Off Saw Blade with 5/8-Inch Arbor and PermaShield Coating
The 8-inch Freud LU85R008 delivers fast, accurate crosscuts and leaves glass-smooth finishes that eliminate the need for sanding. Featuring 64 teeth with alternating bevels and TiCo high-density carbide tips, a unique side-grind setup that polishes material as you cut through it, and Freud’s insulating, Perma-SHIELD coating, this blade is built to deliver top results over the long haul.
6. Freud LU83R008 8-Inch 40 Tooth ATB Thin Kerf Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating
The 8-inch Freud LU83R008 offers a configuration that pairs flat teeth and alternate top bevel teeth to ensure strong performance both when ripping and when crosscutting. Also offering TiCo high-density carbide tips, laser-cut, anti-vibration slots that eliminate the need for stabilizers, and Freud’s insulating, Perma-SHIELD non-stick coating, this multi-purpose blade is built for lasting convenience.
7. Freud LU91R008 8-1/2-Inch 48 Tooth ATB Saw Blade with 5/8-Inch Arbor and PermaShield Coating
This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the workpiece down and towards the fence. Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results. 5/8″ arbor 0.090 kerf.
8. Hitachi 998862 60-Teeth Tungsten Carbide Tipped 8-1/2-Inch ATB 5/8-Inch Arbor Finish Saw Blade
The Hitachi 998862 is brazed with 3-metals for an optimal cutting performance. Use this blade for decorative moldings, veneer laminates, soft and hardwood cabinetry and cross-cutting all woods with a clean, ultra-fine finish. With tungsten carbide tipped teeth, this alternate top bevel blade withstands years of repeated use and outlasts traditional blades. Tungsten carbide gives saw blades (and some router bits) a sharper, longer-lasting tip. With 60-teeth, a .087-inch kerf width, 5/8-inch arbor and the strength of tungsten carbide, this 8-1/2-inch blade delivers smooth rapid cuts. It is warranted to the original purchaser to be free from defect in materials and workmanship for a period of 30-days from the original purchase date.
9. Hitachi 998840 24-Teeth Tungsten Carbide Tipped 8-1/2-Inch ATB 5/8-Inch Arbor Finish Saw Blade
8-1/2-inch ATB saw blade with 24-teeth, 5/8-inch arbor and an .087-inch kerf width. Ideal for framing, ripping and cross-cutting in plywood, wood composites and natural wood. Tungsten carbide tipped teeth withstand years of repeated use and outlasts traditional blades. Delivers smooth rapid cuts. Cuts through composite and natural wood. Comes with a 30-day limited warranty.