If you’re passionate about creating various objects from metal and other similar materials, then you’ll certainly need to make sure that you get yourself the best benchtop drill press for metal work, especially if you’re serious about this. So basically what a drill press does is that it helps you bore holes which are evenly sized into metal, wood and other types of materials. In fact, there are drill presses that are specifically built for boring holes into metal, while others are made to bore holes into wood. In the paragraphs below we’re only going to talk about the former, so with that being said, let’s check out:
First of all, let me tell you that the Skill 3320 takes thirty minutes to be assembled, so make sure that you follow the directions very well if you don’t want it to take longer. Now when it comes to the motor, it’s a three point two amp motor that offers you enough power for most drilling jobs. There is also an adjustable speed pulley that you can use (you’ll find it above the motor) to control the revolutions per minute depending on what you’re working on. Using it, you’ll be able to set the Skill 3320 to 5 different speeds, including 570, 900, 1390, 2050 and 3050 revolutions per minute.
When you want to change the speeds, you should know that this is done manually by using the tension knobs on each side of the housing. You also need to slide the motor forward and then finally consider adjusting the belts to fit your preferences.
Adjustable Work Table
It’s fair to say that no matter how great a drill press is, if it doesn’t have an adjustable table it’s not really one you’d be interested in getting. Luckily, the Skill 3320 features an adjustable table which you can control using a crank handle. If you want, you’ll also be able to tilt it to the right or to the left by forty five degrees.
The slots on the table are a great addition, too, since they can be used in conjunction with a wide range of clamps and fences. Based on this fact alone and the possibility of moving the table to various angles, a lot of users have called the Skill 3320 the Best Benchtop Drill Press for Metal for those who don’t want to spend a fortune on a drill press.
LaserX2 Two Beam Laser System
Now here is where things get interesting. The Skill 3320 features a laser beam system that’s going to become vital in your field of work, since it helps you align drill bits on the work piece. Thanks to this system, you’ll find that lining up large bits is going to be much more accurate and simple. As for the lasers, adjusting them is a breeze, so you don’t have to worry about this being complicated.
The Skill 3320 is a very well built drill press that’s going to amaze you right from the first day you’ll use it. If you have a limited budget and you also have little space to work in, then the Skill 3320 is by far the best one for metal work you can get.
- The X2 2-Beam Laser helps ensure precise hole alignment, while the depth adjustment system lets you drill down consistently every time
- Five speeds cut holes cleanly through wood, metal, and other materials with the Drill Press, which accepts larger diameter bits for woodworking and cutting
- To ensure precise angled drilling, the tilting work surface will lock between a zero and 45 degree angle
- The square work surface will help support larger pieces of material while the 1/2-inch keyed chuck accepts larger bits for woodworking and cutting
- Amperage: 3.2
- Rating: 120V
- No Load RPM: 5 Speed; 750-3,050
- Chuck Size: 1/2-Inch
- Drill on Center: 10-Inches
- Tilting Work Table: 0-45 Degrees
- Table Size: 7-5/8-Inches
- Certifications: cSAus
- Limited 3-Year Warranty