Complete Guide To Selecting The Best Band Saw Blades

If you are wondering which is exactly the best band saw blade for your particular power tool and cannot decide upon the final choice, then you are at the right place! This guide will practically and step by step show you what ideal features are contained in the ‘perfect’ band saw blades and how must you carry on towards your own decision making…

The blade of the band saw is one of the most important parts of the entire machine, since all of the major functionality is achieved by it. Without a proper blade, the entire gadget will operate poorly resulting in a huge drop in your rate of performance. Even with a good quality blade, you might not be able to acquire an extraordinary result because every blade is not designed to suit all the needs of a workman.


Oh well, since you are working with a band saw, you must be aware of your own needs, that is, the type of material you need to cut with the blade and so on. Prepare a checklist mentally of how exactly you are using it for, before you proceed with evaluating the different options you have in front of you.

  • The type and model of the band saw that you are using. Blades may be different for different models and types of the machine and every blade may not be suitable for use in each of the machine.
  • The type of material you are cutting whether its plastic, wood or metal. The sharpness and quality of the blades for each of the types vary.
  • The thickness of the material and its width that will be passing underneath the blade.
  • The type of cut, whether it’s a straight simple cut only or requires curved or angular cutting too.
  • Your budget, how much you can spend upon the blade now and its maintenance afterwards in the long run.


An ‘ideal’ blade can be defined from your own point of view, for you are the owner and user of the power tool and you know what exactly you want to use the machine for and how intensive the usage is. Here, I am going to mention various qualities of a blade that you must look for to suit your needs and purpose:

  • Pitch of the band saw bladePitch of blade: Let me begin with telling you what exactly is the pitch of the blade… the number of teeth per inch on the blade measure the pitch. The higher the pitch of the blade is, the slower but smoother will be the cut. A lower pitch will result in roughened cut on the edges, but the speed for cutting will be greater. According to your needs, select the suitable blade for your band saw that suits your needs.
  • Width of blade: they are available in different widths, whereby wider ones are used for straight cuts and can also be used for resawing a thick board into thinner veneer sheets. Narrower blades are good for cutting along curved lines and designs.
  • Thickness of the blade: They have varied thickness. A thin blade will have a narrow kerf and that can be useful to cut thin sheets or layers of wooden or metallic material. A thicker kerf is available in a thicker blade and that is also useful many a times. Check out what exactly you want to cut and how much kerf you will require and that should you be going on for which sized blade.
  • Tooth Geometry upon blade: Common band saw tooth shapes include raker, skip, hook and standard. A hook tooth is commonly used since it is ideal for a number of cuts and is faster. Other tooth types are slower and are used for clean cutting for specific purposes.
  • Quality of material of blade: they are ideally made up of heavy carbon steel, which are quite inexpensive. They can also be of carbide tipped teeth or bimetal construction material, both of these which are a little costly but they are far more durable and rigid.

There are a vast number of band saw blades available in the markets and most of these are at quite a reasonable price. They are all durable and tough and have different features and properties. Ranging in a variety of thickness and with different pitch value, some blades may achieve a general purpose whereas some may be for specific use or for special deep cuts through denser materials.

As I said earlier, check out your requirements before you proceed to make your decision of selecting the best one for your machine.

Read More: